Repair & Services.
Call us: (561) 934-2667
Garage Door Repair
First of all if you need to repair garage door , you will need to know the Garage Door Components:
- Door Panels
- Counterbalance System
Each one of this list can be broke or will need to replace with time, garage door part cat rusted and snap with time , as a daily use of the garage door as the main door for our houses, it will need you attention some time here and there.
For all the Components repair at garage door Call us. (561) 934-2667
services we offer
Broken Overhead Garage Door Springs
Torsion & Extension Spring Experts
Broken Garage Door Cables
Broken or Bent Rollers
Bent, Misaligned, or Rusted Track
Replacement of Sections or Panels
Garage Door Hardware Overhauls
Noisy Garage Doors Silenced
25-Point Safety Inspection
Garage Door Repair Counterbalance
Garage Door Counterbalance System & Springs
The roller door has a weight counter balance mechanism. Metal doors are heavy. The counterbalance aids the opener to operate without excessive strain on opening and closing. This mechanism it attached to the door via steel cabling. It has a drum that the cabling wraps around and the drum in turn is coupled to a wound-up coil spring. The spring tension counter balances the weight of the door. But the springs sometimes fail and need replacing.
Garage Door Rollers & Hinges
Another area of mechanical break down is the rollers. The rollers hold the door in position and follow the tracks allowing the panels to articulate and follow the tracks. These like all mechanical things require maintenance. Depending on usage these require lubrication at least once a year. If the rollers fail or bind the door may or may not open or close. The rollers wear and require replacement, should last 10-20 years with proper care.
Garage Door Opening Mechanisms
The other point of failure is the door opening mechanism. The safety mechanism that is infrared or laser that prevents closure if obstructed, by let’s say an older person or child, needs to be properly aligned to function. Again, considering the mechanical nature of the opener the arm and track may require lubrication and sometimes the opener just fails and needs replacement.